Steel Slag Crusher Fines


Download Product Data Sheet PDF


Product Code SFS502

ASMS SFS502 is a graded 8x0mm crushed steel slag coarse sand suited to unsealed applications.


APPLICATIONS

SFS502 is used in a variety of unsealed applications, including:

  • General fill
  • Hardstand areas
  • Asphalt sand
  • Cattle runs
  • Cement making raw material
  • Not recommended for use in constrained applications, under rigid pavements or concrete


COMPOSITION AND MATERIALS

SFS502 is produced from steel slag by crushing, screening and processing to remove all single size aggregates and metals resulting in crusher fines.

Steel furnace slag is a non-metallic product consisting essentially of calcium silicates with fused oxides of iron and aluminium.

The material is produced simultaneously with steel in a basic oxygen furnace and is a predominantly crystalline, solid rock-like product.


ADVANTAGES 

  • Cementitious properties
  • Well graded
  • Resistant to heat and fire
  • High load bearing capacity
  • Effective utilisation of an industrial by-product conserving natural resources


TYPICAL GRADING

 SIEVE% PASSING 
9.5 mm 99
 6.7 mm  95
 4.75 mm  80
 2.36 mm  55
 1.18 mm  30
 600 um  30
 75 um  9

TYPICAL PHYSICAL PROPERTIES

 PROPERTY UNIT  TYPICAL
 Maximum Dry Density  t/m3  2.7
Optimum Moisture   % 11
Liquid Limit   % n/a
Plastic Limit  %  n/a
Plasticity Index   - Non-Plastic
Linear Shrinkage   % 0
pH   - 12


TECHNICAL SERVICES AND CUSTOMER ENQUIRIES 

Australian Steel Mill Services Pty 
21 Processing Area 
Springhill Road 
PORT KEMBLA NSW 2505 


Telephone: 02 4255 1125 
Email: enquiries@asms.com.au